How to Put together water features for your garden

Team Member, Nacelle takes us through the process, showing us how to put a beautiful water feature for your garden which could be the reason for the envy of your friends.

•To create a water feature, first you need to have all the things which are required to do the same. Like, you need water, a kit, outside power source. But, no plumbing is required.

•The kit which mainly consists of cubing with a hose, a base consisting of three pieces which is easy to slide together and has a screwing at the back, a pump with an adjustable water flow and a two meter hose is all gathered.

•When you are doing the base, you need to have the pump in the trough and the hose has to go through the groove on the base otherwise it would be difficult to do it at the end.

•The two pieces of the base are held together with the hose moving through the groove freely and the base is held together with a screw and a nut and is tightened with a screw-driver.

•On the heave there is an opening which gives us an access to the pump. The pump is set up with the water flow adjustment knob. The cubing from the jar has to pass through the middle of the base and then is connected with the pump lock pad and is placed inside the trough with the suction caps on the bottom of the trough.

•And then, the trough is filled with water. Also, make sure you fill the pump. Otherwise, you will hear a ticking noise which means that you need more water.

•Once the base is filled with water, it can be decorated with pebbles.

•And then, you have the beautiful water feature. You need to maintain it by topping it with water. Also, make sure that the pump is submerged.